Skip to content
Serving Fremont and nearby cities Open 24 hours, 7 days a week ยท (669) 286-3980

Furnace Repair in Newark, CA

The short answer

PrimeAir HVAC Repair Service fixes gas furnaces in Newark, CA, including no-heat calls, ignition failures, short cycling and blower problems, with 24/7 emergency service. Bay Area Air District rules don't require you to replace a working furnace, so repair is often a reasonable choice. Those rules do matter when you plan a future replacement.

Newark winters are mild, but chilly, damp nights still make a working furnace matter. When yours won't light, blows cold air, cycles on and off, or starts making new noises, PrimeAir HVAC Repair Service sends a technician from our Fremont base, about 5 miles away, to find the cause and fix it. We repair gas furnaces in homes across the 94560 ZIP code, from older forced-air systems to newer variable-speed units. We explain what we find before any work starts.

Common Furnace Problems in Newark Homes

Many furnaces in Newark run only part of the year and sit idle through the dry summer. That pattern causes its own problems. Dust settles on burners and flame sensors, igniters can crack after long rests, and filters get forgotten until the first cold week. These are the issues we see most often:

  • The furnace won't ignite, or it lights and then shuts off within seconds. This is often a dirty flame sensor or a failed hot surface igniter.
  • The blower runs, but the air coming out is cold.
  • Short cycling, where the system turns on and off every few minutes.
  • A burning dust smell on startup that doesn't fade after the first hour or so.
  • Squealing, rattling or a loud boom at ignition.
  • The thermostat calls for heat, but nothing happens.
  • Some rooms stay cold while others heat normally. This is often tied to airflow or duct problems.

What Happens During a Repair Visit

We start by asking what you've noticed and when it began. The technician then checks the thermostat, power, gas supply, filter and the furnace control board. Most modern furnaces flash a diagnostic code that narrows the search.

Next, we test the igniter, flame sensor, pressure switch, inducer motor and blower. We also inspect the heat exchanger and venting. Before we start any work, you get a plain explanation of the cause, your repair options and what each one involves. If a part has to be ordered, we tell you how to keep the house safe and comfortable until it arrives.

Repair or Replace? What the Air District Rules Mean for You

If your furnace works or can be fixed, the Bay Area Air District appliance rules don't force you to replace it. The rules apply only when an existing furnace fails or is replaced.

Timing still matters. Under Rule 9-4, natural gas furnaces manufactured starting in 2029 must meet a zero-NOx emission standard. In practice, that points homeowners toward heat pumps when a furnace is replaced after that date. Your furnace may be older and need a major repair, such as a heat exchanger or control board. In that case, weigh a repair that buys a few more years against planning a switch on your own schedule, rather than in the middle of a cold-night breakdown.

If you're considering a heat pump, note that the federal 25C tax credit only covered systems placed in service before December 31, 2025. It isn't available for new installations. BayREN and your local clean energy provider may offer heat pump and electrification incentives. Amounts and availability change by funding cycle, so we confirm the current offer before including it in any quote.

When a Furnace Problem Is an Emergency

Some symptoms mean you should shut the system off and get help right away. We offer 24/7 emergency service for situations like these:

If you don't have working carbon monoxide alarms near sleeping areas, ask our technician where they should go during the visit.

  • You smell gas near the furnace or anywhere in the house. Leave first, then call your gas utility or 911 from outside.
  • A carbon monoxide alarm is sounding.
  • Burner flames are yellow or flickering instead of a steady blue.
  • There is soot or scorching around the furnace cabinet.
  • You have no heat at all and an infant, an older adult or someone medically vulnerable is at home.

Furnace Repair in Newark and Nearby Cities

Newark is a short drive from our Fremont shop, so we can reach addresses throughout 94560 without a long trip. We also repair furnaces in Union City, Hayward, Menlo Park, East Palo Alto and Mountain View. Your furnace might sit in a garage, an attic or a hallway closet. We'll work around the access and fit the visit into your schedule.

More services in Newark

Related

What to expect

How a visit goes

  1. Diagnose First

    We track down why your system is acting up before suggesting a part or a replacement, so you're not paying to guess.

  2. Plain Explanations

    We tell you what's wrong, what your choices are, and what each one involves, in language that makes sense. Then you decide.

  3. Repair When It Makes Sense

    If your equipment can be fixed and still has life left, we'll say so. Bay Area appliance rules don't require replacing a system that works, and neither do we.

FAQ

Common questions

How do I know if my furnace needs repair or just a new filter?

Replace the filter first if it looks gray or clogged, then try the heat again. If the furnace still won't light, shuts off quickly, blows cold air or short cycles, the problem is likely an igniter, flame sensor, pressure switch or control issue that needs a technician.

Do I have to replace my gas furnace because of the Bay Area Air District rules?

No. The Air District appliance rules don't require replacing working equipment. They apply only when an existing furnace fails or is replaced.

Is a burning smell normal when I turn the heat on for the first time?

A light dusty smell for the first hour or so is common after a furnace sits all summer. If it lingers, smells electrical, or comes with smoke or a gas odor, turn the system off and call for service.

Can you come out at night or on weekends?

Yes. We offer 24/7 emergency service for Newark homes, including no-heat calls, carbon monoxide alarms and other urgent furnace problems.

Should I repair an old furnace or switch to a heat pump?

It depends on the repair and the condition of the furnace. A smaller repair on a sound unit often makes sense. Gas furnaces manufactured from 2029 must meet a zero-NOx standard, so for a major repair on an older unit, it's worth planning a heat pump switch on your own timeline.

Is the federal tax credit still available for a new heat pump?

No. The federal 25C credit covered qualifying heat pumps placed in service before December 31, 2025. You can still check BayREN and your local clean energy provider for current incentives, and we confirm what's available before quoting it.

Need Heating or Cooling Help?

Tell us what your system is doing, and we'll set up a visit to find the cause and talk through your options. For urgent breakdowns, we offer 24/7 emergency service.

Request Service Call (669) 286-3980
Call (669) 286-3980 Request Service